social.dk-libre.fr is a Fediverse instance that uses the ActivityPub protocol. In other words, users at this host can communicate with people that use software like Mastodon, Pleroma, Friendica, etc. all around the world.

This server runs the snac software and there is no automatic sign-up process.

Search results for tag #proxmox

AodeRelay boosted

[?]Yehor doing things 🇺🇦 » 🌐
@yehor@mastodon.glitchy.social

The answer is no =(

The drive is in good shape without a single bad block, but it is too slow for object storage.

I decided to toss all my SSDs around my to optimize storage and to free up a single drive for cache acceleration in my NAS. With it’s just a routine: move guests, remove nodes from cluster, swap drives, reinstall, re-add nodes, repeat. Boring. Also, it is too late, so I’m leaving it half finished for tomorrow’s me.

    AodeRelay boosted

    [?]Paul Chambers🚧 » 🌐
    @paul@oldfriends.live

    My handyman is building me a little building that will look like an old fashion outhouse to store my backup server... It's going to be around 50 feet from the house, insulated of course. It's around 50 feet from my house. lol. .

    small building 5x5 feet

    Alt...small building 5x5 feet

      [?]Lucas Janin 🇨🇦🇫🇷 » 🌐
      @lucas3d@mastodon.social

      On Sunday, I prepared to move into a temporary new apartment in . It was time to clean my DS918+, there was so much dust after a year!

      Now my is offline (Mini PC , and 4), and I feel orphaned. 😢

      Hoping to find a place soon to put it back online.🤞🏼

      A close-up of my hard drive, covered in dust. Behind tou can see my Synology DS918+

      Alt...A close-up of my hard drive, covered in dust. Behind tou can see my Synology DS918+

      Four Seagate IronWolf hard drives from my Synology #DS918+. The drives are numbered 1 to 4 to make them easy to reconnect.

2 × 8 TB + 2 × 20 TB

      Alt...Four Seagate IronWolf hard drives from my Synology #DS918+. The drives are numbered 1 to 4 to make them easy to reconnect. 2 × 8 TB + 2 × 20 TB

        AodeRelay boosted

        [?]Yehor doing things 🇺🇦 » 🌐
        @yehor@mastodon.glitchy.social

        Having a two-node cluster on my cluster was not the brightest idea, taking into account that each Garage node was bound to a separate SSD, installed into a Proxmox node. It's ruined the flexibility and portability of the Proxmox setup completely.

        I'm now reducing the cached media of the instance on Garage storage and thinking about moving back to locally stored media for Mastodon. Or a single-node Garage; I'm not sure yet.

          AodeRelay boosted

          [?]Paul Chambers🚧 » 🌐
          @paul@oldfriends.live

          Home lab cluster about to grow! We won a pallet of computers at the gov auction that was pulled out of the communication center. Practically a steal. Sorry, Sam Altman, you can't touch this

          11 desktop computer in the boot of an suv

          Alt...11 desktop computer in the boot of an suv

            AodeRelay boosted

            [?]Heinlein Support » 🌐
            @heinleinsupport@social.heinlein-support.de

            Du hast dein Weiterbildungsbudget 2026 noch nicht ausgeschöpft?

            In unseren Linux-Schulungen sind bis Jahresende noch ein paar Plätze frei. Ob -Administration, Virtualisierung mit , , Container und , Monitoring mit oder der sichere Betrieb von Mailservern: Unsere Kurse vermitteln Wissen, das du im Admin-Alltag direkt anwenden kannst.

            Starte mit unseren Schulungen gut vorbereitet in dein Linux-Jahr 2027!

            Jetzt Kursplatz sichern:
            heinlein-support.de/news/freie

            Foto Kursteilnehmender

            Alt...Foto Kursteilnehmender

              [?]gyptazy » 🌐
              @gyptazy@gyptazy.com

              live migration of a VM on 15.1!

              I really, really reeaaallly want to see becoming a FreeBSD based replacement or alternative to solutions like () or ().

              Also interesting for my own @BoxyBSD@bsd.cafe project utilizing this feature. So, I've been working at this for some time now.

              First working draft moving a VM which has its storage on a NFS server (ZFS based send/rec. as local storage to follow), including multi CPU support. But there's a catch - I'm not sure if I want to publish this later under MIT, rather than GPLv3 or AGPLv3, so this could be a problem for upstreaming.


              bhyve VM live migration on FreeBSD 15

              Alt...bhyve VM live migration on FreeBSD 15

                AodeRelay boosted

                [?]BlablaLinux » 🌐
                @blablalinux@mastodon.blablalinux.be

                ...des conteneurs sur le cluster . Tout est réglé comme du papier à musique !

                  [?]gyptazy » 🌐
                  @gyptazy@gyptazy.com

                  "But where do I find further information about the QDevice in my cluster?" - In !

                  The next release will be big and comes with an improved new corporate layout and many new features that make your life easier! Simple things like information about the QDevice or link speed of PVE nodes are now directly shown from the PegaProx UI. I don't want to spoiler too much, so stay tuned for the next big update of PegaProx!


                  Proxmox QDevice in PegaProx

                  Alt...Proxmox QDevice in PegaProx

                    [?]Fabien LOISON (FLOZz) » 🌐
                    @FLOZz@mastodon.social

                    🟠 Nouvel article sur le blog !

                    Aujourd'hui on va voir comment faire un bindmount dans un container LXC sur un serveur Proxmox tout en préservant la possibilité de faire des snapshots.

                    ➡️ blog.flozz.fr/2026/11/03/proxm

                    Bonne lecture ! 😄

                    Illustration de l'article : appareil photo Polaroid sur fond jaune. On peut lire sur l'appareil « Proxmox Snapshot System » à la place du modèle de l'appareil.

                    Alt...Illustration de l'article : appareil photo Polaroid sur fond jaune. On peut lire sur l'appareil « Proxmox Snapshot System » à la place du modèle de l'appareil.

                      AodeRelay boosted

                      [?]BlablaLinux » 🌐
                      @blablalinux@mastodon.blablalinux.be

                      La suite logique du samedi : les conteneurs y passent aussi ! 🤖✨
                      77 conteneurs LXC mis à jour sur tout le cluster (pvenocl à pvenocl6) sans broncher.
                      Le cluster est fin prêt pour le week-end ! 🚀🐧

                        AodeRelay boosted

                        [?]BlablaLinux » 🌐
                        @blablalinux@mastodon.blablalinux.be

                        Samedi matin sur le cluster : les scripts maison déroulent les 6 nœuds (pvenocl à pvenocl6) et le ménage sur est bouclé sans accroc ! 🤖✨
                        Pendant que l'automatisation bosse, café et bon week-end à tous ! ☕🚀
                        3 VMs à jour sur pvenocl
                        RAS sur les nœuds 2 à 6
                        Nettoyage Mastodon OK

                          Fred de CLX boosted

                          [?]BlablaLinux » 🌐
                          @blablalinux@mastodon.blablalinux.be

                          Salut ! Un petit coup de frais sur le lab ! 🚀

                          Les conteneurs viennent de passer à la casserole : , et sont tout beaux, tout propres et mis à jour. Ça tourne au poil ! 🐧✨

                            Timo Tijhof boosted

                            [?]Pikapods » 🌐
                            @Pikapods@mastodon.social

                            Tesco bought perpetual VMware licenses in 2021, only for Broadcom to drop support for them in January 2026.

                            Now the UK supermarket giant is hiring a team to migrate its in-store edge platform, which runs checkout, payments, and stock management, to open-source Proxmox. 🚀

                            Even "perpetual" proprietary licenses only last until the next acquisition.

                            itsfoss.com/news/tesco-vmware-

                              AodeRelay boosted

                              [?]BlablaLinux » 🌐
                              @blablalinux@mastodon.blablalinux.be

                              Mettre à jour ses conteneurs depuis son smartphone en direct du canapé ou en déplacement... C'est validé par l'Admin ! 📱🐧
                              Un petit coup d'œil sous le capot en vidéo pour voir comment je gère ça au quotidien 👇

                              Musique: Slip And Slide
                              Musicien: Joshoo (from Audiio)

                                AodeRelay boosted

                                [?]BlablaLinux » 🌐
                                @blablalinux@mastodon.blablalinux.be

                                Suite de la tournée du samedi : c'est au tour des conteneurs sur mes clusters ! 🐧📦
                                22 sur pvenocl3, 14 sur pvenocl2, 16 sur pvenocl6, 10 sur pvenocl4 et pvenocl5, et 5 sur pvenocl : tout le monde est mis à jour avec succès et sans redémarrage requis. L'automatisation tourne au poil ! ⚙️✨

                                  AodeRelay boosted

                                  [?]BlablaLinux » 🌐
                                  @blablalinux@mastodon.blablalinux.be

                                  Samedi rime avec automatisation sur mes clusters ! 🐧🤖
                                  Tournée de màj des VM sur les nœuds (pvenocl à pvenocl6) : tout est au vert et sans accroc. Côté docker-mastodon, le nettoyage de maintenance s'est déroulé nickel.
                                  L'automatisation maison, y a que ça de vrai ! ⚙️✨

                                    [?]William Weber Berrutti » 🌐
                                    @wwberrutti@ohai.social

                                    @homelab

                                    In this blog post, I describe how I continued learning about self-hosting, which is essentially a practice to host websites or services (like e-mail, file sharing, game servers, etc) on my own servers so I can have better control over data, privacy and computing infrastructure to potentially save costs and improve my computing skills while also benefitting people around me:

                                    cyantusk.neocities.org/news/20

                                      [?]gyptazy » 🌐
                                      @gyptazy@gyptazy.com

                                      Thin LVM with shared block storage in ? YES!

                                      At our , several people came in touch w/ me & said that LVM thin-provisioned with iSCSI, FC or NVMeoF would be a dream. Let me make it become real!

                                      PS: My mate @formorer@rollenspiel.social is also working on something huge! Guess, we should make a special event about storage plugins for Proxmox VE - maybe within the next virtualization gathering at @credativde@mastodon.social or maybe as a special edition. Let's see, stay tuned!

                                      More about it: https://gyptazy.com/blog/proxmox-shared-block-storage-with-lvm-thin-provisioning-provider/
                                      Demo: https://youtu.be/pQHazr50PVg


                                      Adding LVM Thin as shared storage in Proxmox

                                      Alt...Adding LVM Thin as shared storage in Proxmox

                                      Assigning the LVM Thin to a VG

                                      Alt...Assigning the LVM Thin to a VG

                                        AodeRelay boosted

                                        [?]Larvitz :fedora: » 🌐
                                        @Larvitz@burningboard.net

                                        Updated: "No Proxmox Backup Client for RHEL? Hold My Container Runtime"

                                        The client borrowed from ayufan's old v3.4 server image has a proper replacement: ghcr.io/chofstede/pbs-client

                                        Just proxmox-backup-client, x86_64 + aarch64, from Proxmox's official repo, rebuilt weekly. On RHEL 10 aarch64: 28.8 GiB in ~3 min.

                                        blog.hofstede.it/pbs-client-rh

                                        github.com/chofstede/pbs-client

                                          [?]Cyril Brulebois » 🌐
                                          @CyrilBrulebois@mamot.fr

                                          Between annoyed and frustrated not to find a quick way around `only root can set 'arch' config (500)` with this instance: hotpatching the code to pretend I'm `root@pam` doesn't seem to work or be sufficient, and there are no obvious relevant changes in the Git repository that I could try and cherry-pick.

                                          Guess I should try and pretend to enjoy the weekend instead…

                                            [?]gyptazy » 🌐
                                            @gyptazy@gyptazy.com

                                            Early in the morning! Preparing the - a day full of ! I’m happy to welcome you later!

                                              [?]gyptazy » 🌐
                                              @gyptazy@gyptazy.com

                                              Less than 24 hours until 2026 kicks off, and I’m already counting down the hours until I can happily welcome all attendees to our event at @credativde@mastodon.social!

                                              There'll be several great talks from Proxmox Server Solutions, NetApp, , credativ with Ceph and Erkan Yanar with CAPI and declarative Deployment on . Next to this, we'll have some lightning talk from (for VDI solutions) and who recently shipped a great storage plugin for Proxmox!

                                              During the breaks and the socializing afterwards, I’m happy to have great talks with you about Proxmox, PegaProx, Ceph and virtualization-related topics in general! Run !

                                              See you tomorrow!

                                              Proxday 2026

                                              Alt...Proxday 2026

                                                AodeRelay boosted

                                                [?]gyptazy » 🌐
                                                @gyptazy@gyptazy.com

                                                @bastian@scheefe.de dann vielleicht gerade hier sinnvoll einer relay Instanz beizutreten. , , , und sind immer top Themen auf https://fedi-relay.gyptazy.com - würde mich freuen dich an Board begrüßen zu dürfen :)

                                                  AodeRelay boosted

                                                  [?]Jay :cachyos: [he/him] » 🌐
                                                  @jay@social.zerojay.com

                                                  AodeRelay boosted

                                                  [?]BlablaLinux » 🌐
                                                  @blablalinux@mastodon.blablalinux.be

                                                  Un petit script Bash pratique pour renommer ou réorganiser en masse les ID de vos sauvegardes de conteneurs (CT) sur Server (PBS) 🛠️

                                                  Il intègre une étape de vérification, un mode simulation par défaut et l'arrêt propre des services PBS lors du déplacement.

                                                  👉 Dispo ici : opengist.blablalinux.be/Blabla

                                                    AodeRelay boosted

                                                    [?]BlablaLinux » 🌐
                                                    @blablalinux@mastodon.blablalinux.be

                                                    Et le samedi, c'est le gros morceau :
                                                    • 10h : mise à jour des VMs
                                                    • 11h : mise à jour des conteneurs LXC
                                                    • Cet après-midi : WatchTower prend le relais pour les images Docker
                                                    Un serveur aux petits oignons sans lever le petit doigt. Et vous, quelle est votre routine sysadmin du week-end ? 👇

                                                      AodeRelay boosted

                                                      [?]BlablaLinux » 🌐
                                                      @blablalinux@mastodon.blablalinux.be

                                                      Coup dur pour l'un de mes nœuds : le SSD ZFS a complètement rendu l'âme sans prévenir ! Disque invisible, pool aux abonnés absents... Heureusement, hop, un nouveau SSD, une restauration des sauvegardes et tout est rentré dans l'ordre.
                                                      Le coupable est mort, vive le nouveau !

                                                      mastodon.blablalinux.be/@blabl

                                                        Fred de CLX boosted

                                                        [?]Michael W|Warren Lucas :flan_molotov: » 🌐
                                                        @mwl@io.mwl.io

                                                        That's chapter 10 of , on delegation, done! Covers delegating to users, jails, and unprivileged containers.

                                                        Wishing proxmox had better ZFS integration, but maybe it'll come.

                                                        Want your name in the book? mwl.io/sponsor

                                                        But now, pajamas and Ted Lasso.

                                                          Fred de CLX boosted

                                                          [?]gyptazy » 🌐
                                                          @gyptazy@gyptazy.com

                                                          Just added direct file level restore INTO the guest VM object in for VE based systems.

                                                          Directly restore files from backup to VMs in with !

                                                          No more awkward workflow where you first have to download the file to your local machine and then upload it back into the VM.

                                                          Requirements:
                                                          The initial implementation has a few requirements and limitations:

                                                          • Backups must be stored on a Proxmox Backup Server. Local backups are currently not supported.
                                                          • The VM must have the QEMU Guest Agent installed and enabled.
                                                          • The VM must be running while the restore operation is performed.
                                                          This feature probably takes place in version 1.4.0 which might make it right to the . You can also meet Nico and me there!


                                                          Alt...PegaProx with direct file-level restore into Proxmox VE based VMs

                                                            AodeRelay boosted

                                                            [?]BlablaLinux » 🌐
                                                            @blablalinux@mastodon.blablalinux.be

                                                            et café : dimanche geek ! 🐧☕

                                                              [?]Simon Greenwood [He/Him] » 🌐
                                                              @simon@gotosocial.grnwds.uk

                                                              I've migrated this here instance slaps roof to new hardware this morning, another Lenovo tiny PC, but this time a M910X with 32GB of RAM and an i7 CPU running Proxmox. It's running other apps of course but this is currently a one core 1GB container connecting to a PostgreSQL container on the same server, and it's handling it comfortably. Got to thank the @gotosocial crew for making it easy to move around. #gotosocial #proxmox #homeserver

                                                                [?]BlablaLinux » 🌐
                                                                @blablalinux@mastodon.blablalinux.be

                                                                Pendant que mes 6 nœuds déroulent tranquillement leur routine du samedi avec aux commandes pour mettre à jour tous mes conteneurs et , moi je profite du week-end les pieds en éventail ! 🐧✨
                                                                Bon samedi à tous !

                                                                  Fred de CLX boosted

                                                                  [?]Dalibo » 🌐
                                                                  @dalibo@mastodon.online

                                                                  JOB : nous recherchons un⋅e senior avec les compétences suivantes => dali.bo/202609_offre_adminsys

                                                                  ✅ système et virtualisation : …
                                                                  ✅ sécurité : , routage…
                                                                  ✅ automatisation : ou
                                                                  ✅ télé-collaboration : …



                                                                  visuel "Dalibo recrute"

                                                                  Alt...visuel "Dalibo recrute"

                                                                    [?]Cryptolab.re » 🌐
                                                                    @foudreclair@piaille.fr

                                                                    Quel mini-PC pour Proxmox ? RAM évolutive, second SSD, réseau 2,5 ou 10 Gb/s : six configurations comparées, du Lenovo reconditionné au Minisforum MS-01.

                                                                    cryptolab.re/posts/2026/meille

                                                                      [?]BlablaLinux » 🌐
                                                                      @blablalinux@mastodon.blablalinux.be

                                                                      C'est le grand ménage du samedi sur les clusters !
                                                                      Au programme du jour :
                                                                      Les ont eu droit à leur petit tour de chauffe (avec 1 mise à jour au passage).
                                                                      Les ont enchaîné avec pas moins d'une soixantaine de conteneurs mis à jour au total sur l'ensemble des nœuds.

                                                                        [?]Matthew Sheffield » 🌐
                                                                        @mattsheffield@mastodon.social

                                                                        I've been getting into lately as a replacement for and I have to say it is incredibly impressive.

                                                                        Super fast, super-low resources, has a mature OCI container support, and works on any major distro.

                                                                        Very cool piece of software!

                                                                          [?]Marud :mastodont_v2: » 🌐
                                                                          @marud@social.marud.fr

                                                                          Du monde ici a déjà configuré une baie de vers un cluster 3 noeuds en utilisant NVMe over RoCE ?

                                                                          Je cherche des informations de faisabilité et s'il existe des pièges (genre le type de filesystem que je peux présenter aux hosts, sachant que ce sera donc du SAN vers du multi-host), notamment comment ça se passe pour le multipath (normalement natif via ANA)

                                                                          Merci pour le reboostipouet

                                                                            zulf boosted

                                                                            [?]BlablaLinux » 🌐
                                                                            @blablalinux@mastodon.blablalinux.be

                                                                            Petite coupure technique en vue ce soir pour mon cluster ! 🔌

                                                                            Je vais en profiter pour faire redémarrer toute l'infrastructure. Il y aura donc une brève interruption sur l'ensemble des services. Pas de panique, tout revient nickel très vite !

                                                                            Merci pour votre patience et bonne soirée à tous ! 🐧

                                                                              [?]nicolas » 🌐
                                                                              @nschont@mastodon.mim-libre.fr

                                                                              AodeRelay boosted

                                                                              [?]BlablaLinux » 🌐
                                                                              @blablalinux@mastodon.blablalinux.be

                                                                              🔧 Mise à jour de la page wiki "Scripts d'auto-update LXC/VM sous Proxmox" !

                                                                              Au programme : notifications Gotify désormais optionnelles (toggle simple), heartbeat même sans mise à jour, et quelques fiabilisations sous le capot. 🐧

                                                                              👉 wiki.blablalinux.be/fr/script-

                                                                                AodeRelay boosted

                                                                                [?]BlablaLinux » 🌐
                                                                                @blablalinux@mastodon.blablalinux.be

                                                                                Hop, un p'tit repo tout chaud sur et bien planqué/synchronisé sur ! 🚀

                                                                                C'est mon p'tit script pour mettre à jour les invités (#LXC et ) sans prise de tête.

                                                                                👉 C'est par ici : github.com/anyblabla/proxmox-u

                                                                                  AodeRelay boosted

                                                                                  [?]BlablaLinux » 🌐
                                                                                  @blablalinux@mastodon.blablalinux.be

                                                                                  La suite du programme de ce samedi matin ! 🚀
                                                                                  À 11h, c'était au tour du deuxième script d'entrer en piste pour mettre à jour tous mes conteneurs LXC sur le cluster pvenocl. Résultat impeccable : tous les conteneurs sont à jour, et aucun redémarrage n'était requis. L'automatisation tourne comme une horloge ! 😎☕️

                                                                                    AodeRelay boosted

                                                                                    [?]BlablaLinux » 🌐
                                                                                    @blablalinux@mastodon.blablalinux.be

                                                                                    Mon petit rituel du samedi est réglé comme une horloge ! ⏰ Mon script d'automatisation des VM sur mon cluster Proxmox a encore fait des merveilles aujourd'hui 🎉
                                                                                    👉 Résultat : Mes VM sur pvenocl mises à jour et zéro redémarrage nécessaire (RAS sur le reste). La vie est belle quand tout roule toute seule ! Et ce n'est que pour les VM... Attendez un peu dans deux ans quand il y aura la même chose pour les Elixirs ! 🚀

                                                                                      [?]Cryptolab.re » 🌐
                                                                                      @foudreclair@piaille.fr

                                                                                      Weekly #32 : plugin Proxmox de TrueNAS en bêta, cluster Pangolin 1.23 en Enterprise Edition, avenir de Portainer CE et RustFS 1.0. Prérequis et points de vigilance.

                                                                                      cryptolab.re/posts/2026/weekly

                                                                                        AodeRelay boosted

                                                                                        [?]Larvitz :fedora: » 🌐
                                                                                        @Larvitz@burningboard.net

                                                                                        RHEL 10 on ARM64. No convenient native Proxmox Backup Client package.

                                                                                        Obviously, I borrowed the client from an old server container, introduced it to SELinux, and pointed it at the host filesystem.

                                                                                        40.6 GiB processed in five minutes. Encrypted. Incremental. Mildly cursed.

                                                                                        “No Proxmox Backup Client for RHEL? Hold My Container Runtime”

                                                                                        blog.hofstede.it/pbs-client-rh

                                                                                          [?]gyptazy » 🌐
                                                                                          @gyptazy@gyptazy.com

                                                                                          Wow, that escalated quickly! Our event for is already sold out! I’m proud to be part of this and to host this event at GmbH with our whole team and to welcome you all! Don’t miss the great talks about , from our friends from the team and from ! I’m also happy to welcome Erkan and Hannes from Proxmox Server Solution at our ProxDay 2026!


                                                                                          ProxDay 2026

                                                                                          Alt...ProxDay 2026

                                                                                            AodeRelay boosted

                                                                                            [?]Sohrab Behdani :freebsd: » 🌐
                                                                                            @sohrab@mastodon.bsd.cafe

                                                                                            Looking for anyone who has successfully installed Proxmox on an HP ProLiant DL380 G6 with a Smart Array P411 controller. I have tried Proxmox 7, 8, and 9. Most attempts end in a black screen or kernel panic. Debian itself also fails to detect the RAID 0 logical drive. I have tried both the older CCISS driver and the modern HPSA driver with no luck. Ubuntu installs without issues and sees the array fine, but I do not want Ubuntu running bare metal. I chose Proxmox because the original ESXi install is full of security vulnerabilities and ongoing problems, and I need something better supported. Has anyone got Proxmox working on this exact hardware, or found a reliable way to make the P411 visible during install?

                                                                                            PS. unfortunately I cannot update the firmware right now and since it is not mine and it is for the place that are work in, this is the test hardware that they gave me to try proxmox and see if it's better than EXSI or not.

                                                                                              AodeRelay boosted

                                                                                              [?]BlablaLinux » 🌐
                                                                                              @blablalinux@mastodon.blablalinux.be

                                                                                              Rituel du samedi matin !
                                                                                              Les VM et les conteneurs LXC du cluster Proxmox VE sont tout propres et à jour.
                                                                                              Étape 1 terminée avec succès... la suite cet après-midi avec la partie Docker !
                                                                                              Bon week-end à tous !

                                                                                                [?]nicolas » 🌐
                                                                                                @nschont@mastodon.mim-libre.fr

                                                                                                Fred de CLX boosted

                                                                                                [?]BlablaLinux » 🌐
                                                                                                @blablalinux@mastodon.blablalinux.be

                                                                                                Quand tout est au vert, c'est le bonheur parfait.
                                                                                                Rien de plus satisfaisant que de voir ses notifications confirmer que la vérification des Server s'est déroulée sans le moindre accro.
                                                                                                Sauvegardes vérifiées et validées : je vais pouvoir dormir sur mes deux oreilles.

                                                                                                  AodeRelay boosted

                                                                                                  [?]BlablaLinux » 🌐
                                                                                                  @blablalinux@mastodon.blablalinux.be

                                                                                                  Petit aperçu en images de l'intégration Server avec un datastore en action ! 🚀📦

                                                                                                    BlablaLinux boosted

                                                                                                    [?]gyptazy » 🌐
                                                                                                    @gyptazy@gyptazy.com

                                                                                                    in with as a first draft… this finally allows easy east-west layer 3 traffic management

                                                                                                    Still WIP, let’s see if I can tell more soon :)


                                                                                                    PegaProx for Proxmox VE with Microsegmentation and East-West traffic management

                                                                                                    Alt...PegaProx for Proxmox VE with Microsegmentation and East-West traffic management

                                                                                                      AodeRelay boosted

                                                                                                      [?]BlablaLinux » 🌐
                                                                                                      @blablalinux@mastodon.blablalinux.be

                                                                                                      Quand l'infra tourne comme une horloge suisse !
                                                                                                      Tout le cluster y est passé : , ... 100 % de succès et même pas besoin de redémarrer un seul conteneur.
                                                                                                      Bref, mise à jour propre, tranquille, et le peut aller boire son café sereinement !

                                                                                                        AodeRelay boosted

                                                                                                        [?]BlablaLinux » 🌐
                                                                                                        @blablalinux@mastodon.blablalinux.be

                                                                                                        📚 Nouvel article sur mon wiki !

                                                                                                        Comment configurer un datastore S3 (MinIO) sur Proxmox Backup Server — que ton PBS tourne en VM ou sur du matériel physique déjà bien rempli ?

                                                                                                        👉 wiki.blablalinux.be/fr/proxmox

                                                                                                          [?]unfa🇺🇦 » 🌐
                                                                                                          @unfa@mastodon.social

                                                                                                          running died. Inexplicable input/output errors in all VMs and containers. EXT filesystems keep spouting errors even though I shut everything down. The only thing that still works is . I will have to rebuild this thing. I named it "The Other Castle", after a historic piece of music by a dear friend of mine. The new home server will need a new name... Any suggestions?

                                                                                                            Simerrön boosted

                                                                                                            [?]BlablaLinux » 🌐
                                                                                                            @blablalinux@mastodon.blablalinux.be

                                                                                                            🐧 Nouveau jouet dans le homelab !

                                                                                                            Mon Proxmox Backup Server 4.2.5 sait maintenant parler S3 avec mon instance MinIO auto-hébergée (SILO) 🪣

                                                                                                            Résultat : mes sauvegardes filent directement dans mon propre cloud objet, sans dépendre d'un provider externe. 100% souverain, 100% libre.

                                                                                                            Bilan de la soirée : quelques erreurs 400 bien tenaces, un disque racine trop petit découvert juste à temps, et un datastore S3 opérationnel avant minuit 🌙

                                                                                                              AodeRelay boosted

                                                                                                              [?]Heinlein Support » 🌐
                                                                                                              @heinleinsupport@social.heinlein-support.de

                                                                                                              Ende August geht es los: Die Heinlein Akademie startet nach der Sommerpause mit praxisnahen -Schulungen ins zweite Halbjahr 2026.

                                                                                                              Ob , , , , oder Linux-Administration: Unsere Kurse vermitteln das Wissen, mit dem Admins Systeme sicher, effizient und selbstständig aufbauen und betreiben können.

                                                                                                              Jetzt anmelden und Kursplatz sichern! 😀

                                                                                                              👉 heinlein-support.de/news/linux

                                                                                                              Mann und Frau gemeinsam am Laptop

                                                                                                              Alt...Mann und Frau gemeinsam am Laptop

                                                                                                                AodeRelay boosted

                                                                                                                [?]BlablaLinux » 🌐
                                                                                                                @blablalinux@mastodon.blablalinux.be

                                                                                                                Voici un petit aperçu du travail de l'ombre en direct (htop, Proxmox, docker stats). La magie du libre et de l'auto-hébergement ! 🐧

                                                                                                                Musique: Glitch Fidelity
                                                                                                                Musicien: Marscott (from Audiio)

                                                                                                                  AodeRelay boosted

                                                                                                                  [?]BlablaLinux » 🌐
                                                                                                                  @blablalinux@mastodon.blablalinux.be

                                                                                                                  Envoi d'un signal de mise sous tension pour tout faire repartir au propre.
                                                                                                                  À 4h07, Uptime-Kuma confirme : tout est repassé au vert ! 🟢

                                                                                                                    AodeRelay boosted

                                                                                                                    [?]BlablaLinux » 🌐
                                                                                                                    @blablalinux@mastodon.blablalinux.be

                                                                                                                    Décidément, la nuit réserve plein de surprises ! 🌙😜
                                                                                                                    À 3h18 du matin, Gotify repasse par là : « ✅ Mastodon Cleanup TERMINÉ » sur le conteneur docker-mastodon.
                                                                                                                    Un petit coup de balai automatique sur le cache et les médias distants pendant que tout le monde dort. Quand ton infra est plus disciplinée que toi ! 🧹🐘✨

                                                                                                                      AodeRelay boosted

                                                                                                                      [?]BlablaLinux » 🌐
                                                                                                                      @blablalinux@mastodon.blablalinux.be

                                                                                                                      Quand tu automatises tellement tout que tu en oublies tes propres scripts ! 😅
                                                                                                                      À 23h pile, notification Gotify : purge massive et nettoyage de /var/log sur tous les nœuds du cluster Proxmox (purge_logs.sh).
                                                                                                                      Le moment exact où tu te dis : « Ah oui c'est vrai, j'avais écrit un script pour ça ! » 😂
                                                                                                                      C'est ça, la vraie magie d'un système qui tourne en totale autonomie !

                                                                                                                        AodeRelay boosted

                                                                                                                        [?]BlablaLinux » 🌐
                                                                                                                        @blablalinux@mastodon.blablalinux.be

                                                                                                                        Pour voir la capture en bonne résolution, rendez-vous sur Picsur : picsur.blablalinux.be/i/d41a86

                                                                                                                        Fin du marathon d'automatisation. Bon week-end à tous !

                                                                                                                          AodeRelay boosted

                                                                                                                          [?]Edd » 🌐
                                                                                                                          @iMeddles@mastodon.eddmil.es

                                                                                                                          Weirdly frustrating day today. We booked a weekend maintenance window at work, to upgrade our cluster from V8 to V9 (as V8 goes eol in a few weeks).

                                                                                                                          The upgrade itself seemed to go smoothly, the first node in the cluster came back fine, but then the second... didn't. Cue 90 mins of troubleshooting (although that included 20 mins for my colleague to head into the office to plug a rescue disk in, because the supermicro LOM refused to mount it remotely 😡) only to discover that the broken node (and the node still pending an upgrade) didn't have the ESP partition in fstab, so /boot/efi was blank.

                                                                                                                          This meant things went horribly wrong when grub-efi-amd64 got updated and attempted to update the boot order, and couldn't. Which apt doesn't seem to treat as an error worthy of an error return code.

                                                                                                                          The annoying thing is, I can't work out how it broke *now*. Either this should have broken earlier, during other updates (as that efi package did get updated through the life of proxmox 8), or it should have kept working through this update. One to solve on Monday I feel.

                                                                                                                            AodeRelay boosted

                                                                                                                            [?]BlablaLinux » 🌐
                                                                                                                            @blablalinux@mastodon.blablalinux.be

                                                                                                                            📊 La liste complète des conteneurs est visible ici : picsur.blablalinux.be/i/f8bcd8

                                                                                                                            Un rapide passage à 512 Mo de RAM, et le problème est réglé. C'est aussi ça la magie du monitoring et des scripts auto : repérer les petits goulots d'étranglement en un clin d'œil ! ☕️💪

                                                                                                                              AodeRelay boosted

                                                                                                                              [?]BlablaLinux » 🌐
                                                                                                                              @blablalinux@mastodon.blablalinux.be

                                                                                                                              C'est samedi, jour de l'automatisation sur le cluster Proxmox ! ⚙️
                                                                                                                              La première tâche s'est lancée à 10h pile et s'est terminée 11 minutes plus tard : 3 VM mises à jour en douceur (PBS, Elasticsearch et Jitsi Meet, bien identifiables en bleu sur la capture) et aucun redémarrage nécessaire. Tout roule tout seul pendant que je peux profiter de mon café ! ☕️
                                                                                                                              Et chez vous, ça automatise aussi le week-end ou c'est tout à la main ? 🛠️

                                                                                                                                Fred de CLX boosted

                                                                                                                                [?]gyptazy » 🌐
                                                                                                                                @gyptazy@gyptazy.com

                                                                                                                                Gleich geht mein Talk über für VE und auf der los!


                                                                                                                                gyptazy FrOSCon

                                                                                                                                Alt...gyptazy FrOSCon

                                                                                                                                  [?]gyptazy » 🌐
                                                                                                                                  @gyptazy@gyptazy.com

                                                                                                                                  Running a small or single user instance in the ? Get connected to other instances by a relay!

                                                                                                                                  I just adjusted my relay instance which now also finally supports ! Of course, it also supports Pleroma, snac, Mastodon, littlefedi, starling and many other ones!

                                                                                                                                  With relays, your own posted content gets distributed to all connected instances, as well you get the content all other instances. Currently, mostly tech related instances are connected, focusing on , , / , and many other things!

                                                                                                                                  More information at: https://fedi-relay.gyptazy.com


                                                                                                                                    [?]gyptazy » 🌐
                                                                                                                                    @gyptazy@gyptazy.com

                                                                                                                                    Interesting, uninteresting, or just plain boring… My cluster on !

                                                                                                                                    I took some time today to create a PVE test cluster on my outdated hardware in NYC and it's interesting, uninteresting, or better said just plain boring. And this is good!

                                                                                                                                    It just works and (mostly) behaves just like you know and would assume. Everything is mostly the same (sure, some things on hw level might be a bit different when playing near hardware) and you want to make sure your hardware supports H flag.

                                                                                                                                    Adapting to might be a good choice, even professional systems became cheaper. Keeping all automation, config and tools might make it even easier. For me it's now about integrating further arm64 support into and creating arm64 based artifacts!

                                                                                                                                      [?]gyptazy » 🌐
                                                                                                                                      @gyptazy@gyptazy.com

                                                                                                                                      Shifting from to (on + ) including automation!

                                                                                                                                      When talking about open-source virtualization platforms, Proxmox VE is probably one of the first solutions that comes to mind. It combines KVM virtual machines, LXC containers, storage, networking and clustering behind a convenient management interface.
                                                                                                                                      But what if you want to build the same kind of environment on FreeBSD?
                                                                                                                                      This is exactly where Sylve becomes interesting.

                                                                                                                                      https://gyptazy.com/blog/sylve-freebsd-ansible-module-automation/


                                                                                                                                        Fred de CLX boosted

                                                                                                                                        [?]LinuxNews.de » 🌐
                                                                                                                                        @linuxnews@social.anoxinon.de

                                                                                                                                        AodeRelay boosted

                                                                                                                                        [?]BlablaLinux » 🌐
                                                                                                                                        @blablalinux@mastodon.blablalinux.be

                                                                                                                                        🔹 Plus de choix matériel : Idéal pour diversifier vos serveurs ou tester de nouvelles architectures.

                                                                                                                                        Une excellente nouvelle pour réduire la consommation d'énergie sans sacrifier les fonctionnalités !

                                                                                                                                        📖 Pour lire le communiqué officiel complet : proxmox.com/en/about/company-d

                                                                                                                                          [?]gyptazy » 🌐
                                                                                                                                          @gyptazy@gyptazy.com

                                                                                                                                          managed by ...

                                                                                                                                          As people kept asking for the modules I developed for my @BoxyBSD@bsd.cafe project, I just made them shiny and prepared them for pushing them upstream.

                                                                                                                                          Making the switch easier for people coming from , it uses mostly the same syntax as the Proxmox modules to keep the interface similar. Next to this, they're built in an equal way with a shared authentication module util, to make sure new modules can directly use the same authentication lib.

                                                                                                                                          Currently it comes:
                                                                                                                                          .
                                                                                                                                          ├── LICENSE
                                                                                                                                          ├── module_utils
                                                                                                                                          │   └── sylve_common.py
                                                                                                                                          ├── modules
                                                                                                                                          │   ├── sylve_jail.py
                                                                                                                                          │   └── sylve_vm.py


                                                                                                                                          Alt...Sylve on FreeBSD orchestrated by Ansible

                                                                                                                                            [?]BlablaLinux » 🌐
                                                                                                                                            @blablalinux@mastodon.blablalinux.be

                                                                                                                                            Ça fait un mois et demi que le boulot me prend tout mon temps, et mon home lab tourne à 100 % en pilotage automatique !
                                                                                                                                            Mes clusters allument des machines, les laissent bosser, puis les éteignent. Les VM et LXC se mettent à jour, redémarrent quand il faut, et des scripts sur mesure gèrent la maintenance d'outils comme PeerTube ou Mastodon et bien d'autres.

                                                                                                                                              [?]gyptazy » 🌐
                                                                                                                                              @gyptazy@gyptazy.com

                                                                                                                                              just got released in v1.0 and is out of beta now!

                                                                                                                                              PegaProx for VE and clusters made a huge step and is finally out of beta!

                                                                                                                                              The first stable release also comes around with companies providing enterprise support. If you need SLA-backed help running PegaProx in production (or training sessions) you can now find a support partner at:

                                                                                                                                              Enterprise Support & Sponsors: https://pegaprox.com/sponsors.html
                                                                                                                                              Release: https://github.com/PegaProx/project-pegaprox/releases/tag/v1.0
                                                                                                                                              Website: https://pegaprox.com


                                                                                                                                              PegaProx v1.0 Release

                                                                                                                                              Alt...PegaProx v1.0 Release

                                                                                                                                                AodeRelay boosted

                                                                                                                                                [?]BlablaLinux » 🌐
                                                                                                                                                @blablalinux@mastodon.blablalinux.be

                                                                                                                                                ✅ Nettoyage automatisé des vieilles sauvegardes de config

                                                                                                                                                Tuto complet, avec explications et code à jour 👉 wiki.blablalinux.be/fr/script-

                                                                                                                                                  AodeRelay boosted

                                                                                                                                                  [?]Michael » 🌐
                                                                                                                                                  @mkleger@swissodon.ch

                                                                                                                                                  BackupPilot 1.1.0 ist da.

                                                                                                                                                  Neu gibt es eine experimentelle PBS HTTP Control Plane. Snapshot- und Archivlisten, Zugangsdaten prüfen sowie Prune Dry-Runs können optional direkt über die Proxmox Backup Server Management API laufen. Bei Problemen wird automatisch auf den proxmox-backup-client zurückgefallen.

                                                                                                                                                  Dazu kommen viele Bugfixes, Stabilitätsverbesserungen und kleinere Optimierungen.

                                                                                                                                                  Release:
                                                                                                                                                  git.onesystems.ch/BackupPilot/

                                                                                                                                                    AodeRelay boosted

                                                                                                                                                    [?]BlablaLinux » 🌐
                                                                                                                                                    @blablalinux@mastodon.blablalinux.be

                                                                                                                                                    Le niveau ultime de l’automatisation ?
                                                                                                                                                    Quand tu reçois une notification Gotify pour une tâche de maintenance automatisée que tu avais toi-même codée… et que tu avais complètement oubliée ! 😂
                                                                                                                                                    Merci au "moi du passé" d'avoir pensé à tout. L'infra bosse pendant que je bosse !

                                                                                                                                                      [?]BlablaLinux » 🌐
                                                                                                                                                      @blablalinux@mastodon.blablalinux.be

                                                                                                                                                      La suite du bilan : après les nœuds et les LXC Proxmox, c'est au tour de Watchtower de faire le ménage dans mes conteneurs. Ça tourne tout seul ! 🚀 🤖

                                                                                                                                                        AodeRelay boosted

                                                                                                                                                        [?]BlablaLinux » 🌐
                                                                                                                                                        @blablalinux@mastodon.blablalinux.be

                                                                                                                                                        L'automatisation sous Linux, c'est quand même une vraie merveille ! 😎

                                                                                                                                                          0 ★ 0 ↺

                                                                                                                                                          [?]oldsysops » 🌐
                                                                                                                                                          @oldsysops@social.dk-libre.fr

                                                                                                                                                          @mmu_man@m.g3l.org have a gui and can spin off lxc container no ?